banner



How To Clean Washable Furnace Filters

Back to Weblog

How to Make clean an Electrostatic Air Filter

Dirty air filters can cause many problems with your heating and cooling systems, besides as your indoor air quality. That's why your HVAC contractor is so adamant virtually the importance of using make clean filters and replacing filters on a regular basis. While replacement filters tin be costly and seem wasteful, electrostatic air filters are a reusable option. To get the well-nigh out of an electrostatic air filter, y'all'll demand to know how to properly make clean them. Here's more on these types of air filters and how to clean them.

Example of an electrostatic air filter

What Is an Electrostatic Air Filter?

An electrostatic air filter is a type of furnace filter. It is washable and reusable, unlike commonly used disposable replacement furnace filters.

Electrostatic air filters are composed of vented metal layers. As air flows through the layers:

  • The metal material becomes charged with static electricity.
  • The static electricity attracts contaminant particles, holding them within the filter until they are washed out.

10 Steps to Cleaning an Electrostatic Air Filter

Clean your electrostatic air filter past following these steps:

  1. Carefully remove the electrostatic air filter from the filter chamber located near your system's air handler.
  2. Using a garden hose with a power spray nozzle, turn on the water to full pressure.
  3. Spray the filter's clean side, the side that is opposite of the filter's airflow arrows. This backwashes the filter, forcing the contaminants out.
  4. Go on to spray the filter with water until the entire surface area of the filter has been cleaned.
  5. A few times a year, clean the electrostatic filter with a balmy solution, made from water and dishwashing soap. Spray this solution over both sides of the filter. Allow it to stand for a few minutes, and then echo steps ii-4 to rinse the filter.
  6. If necessary, spray the forepart side of the filter with water for a few additional minutes to remove whatsoever tough material.
  7. Prop your air filter up then its drain holes are facing downwardly.
  8. Let water drain and the filter dry out for 15 to 30 minutes (or every bit long as needed then that no more water is dripping off of the filter).
  9. In one case the filter is completely dry, reinstall it in the direction indicated by the airflow arrows.
  10. Repeat this cleaning process on a monthly basis.

While keeping your electrostatic air filter clean can exercise a lot to continue your system running optimally, somewhen, every system needs maintenances or repairs.

How to Clean an Electrostatic Air Filter | HVAC Contractors

Schedule Annual Furnace Maintenance or a Erstwhile Tune-Upwards

For like shooting fish in a barrel, worry-free heating maintenance, join our Condolement Club. You'll savour savings while getting the best HVAC service in Smyrna. Benefits of membership include:

  • Conducting thorough visual inspections of the entire HVAC system
  • Inspecting ductwork, indoor blowers, air handlers, exhaust outlets, and evaporator coils
  • Cleaning indoor blowers and outdoor condensers as needed
  • Checking everything from wet and dry bulbs to electrical connections, relays, suction pressure, amp depict, and more
  • Checking and adjusting thermostat settings
  • Lubricating all moving parts
  • And more!

If you demand HVAC service in Smyrna or Rutherford County, TN, don't hesitate to contact the trusted HVAC technicians and installers at Parker's Heating & Cooling today! Call 615-355-9137 to schedule service.

How To Clean Washable Furnace Filters,

Source: https://www.parkershvac.com/blog/how-to-clean-electrostatic-air-filter/

Posted by: utechtcittle1995.blogspot.com

0 Response to "How To Clean Washable Furnace Filters"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel